0
X

Review your order

Total Price: £0.00

Land

Modern Soldier Land systems must offer a blend of mobility and protection and allow seamless integration with weapon systems; especially personal weapons. Our exclusive Land system does this in spades.

On the modern battlefield, scalability is king!

Scalable Protection: Light armour coverage can be employed for operations where pace is key, in very hot environments, or for covert operations. Alternatively hard and soft armour elements can be combined to add coverage to the torso, extremities, flanks and abdominal. This reduces mobility but gives higher levels of protection during urban assaults or for those clearing valuable points.

Scalable Load Carriage: MOLLE allows the addition of pouches and other equipment but it is time consuming to attach. Our systems contain MOLLE but also allow the quick fitting of some load carriage options, so providing “on the job” adaptability. It might be that when leaving a vehicle a small pack is added or extra ammunition is carried.

Interoperability:  Be it driving vehicles or climbing a ladder, our systems ensure the Operator is as unhindered as possible. Our systems allow personal weapons to be shouldered correctly, allowing them to be fired accurately, giving the Operator an advantage in combat. The stowage of different ammunition natures and the ability to reconfigure quickly is extremely valuable.

Read more

CLOTHING

Guide Finger Gloves

These gloves are all about warmth. A split-finger design gives the Black Diamond Guide Finger gloves extra warmth while maintaining the dexterity that mountain professionals need for bell-to-bell days. The GORE-TEX® inserts ensures total moisture protection while the large gauntlets keeps powder from sneaking its way in through the back door. In addition to a 300 g Polartec® fleece palm lining, the Guide Finger gloves also features removable liners with PrimaLoft® Gold Insulation and boiled wool.

  • 100% waterproof and breathable GORE-TEX insert with Plus Warm Technology stays with removable liner
  • Abrasion-resistant, woven nylon shell with 4-way stretch
  • Removable liner features 170 g PrimaLoft Gold and boiled wool 300 g Polartec fleece palm lining
  • Goat-leather palm and palm patch
  • Foam padding on knuckles for impact protection

Read more

ISG Jacket Multicam

INSULATED SHELL GARMENT

High freedom of movement and flexibility characterize this multifunctional jacket. It combines weather protection with thermal management. Due to it’s material proberties the ISG Jacket  is wind and water repellent, as well as breathable. The proven G-LOFT® insulation on the back and front regulates temperature and humidity.

FEATURES

  • Detachable & stowable hood
  • Hood with elastic drawstrings adjustable in 2 directions
  • Width adjustable collar with thermo fleece
  • Water-repellent YKK® zippers
  • front zipper with wind flap and chin guard
  • Ventilation system – access openings with zipper at the side seam
  • 2 large outer pockets with micro fleece
  • Pre-shaped sleeves
  • 2 upper arm pockets with Velcro for attaching badges
  • Internal, one-handed adjustable elastic drawstring at hem
  • Compression bag included

Read more

Crye Precision GB4 Combat Pant™

Crye Precision GB4 Pants are the next generation of Combat Apparel, which features innovative, custom stretch VTX RIPSTOP™ fabric. Constructed with Invista’s T420 high tenacity nylon fiber to be light yet strong. Integrated stretch allows for a slimmer cut with maximum mobility. Crye Precision GB4 Combat Pant pockets are low profile and engineered to reduce bulk while still allowing room for all essential gear. Mesh venting for maximum air-flow and breathability. Built-in kneepad adjuster and padded adjustable waistband. Designed for use with our removable Crye Precision AIRFLEX™ IMPACT COMBAT KNEE PADS (sold separately). Made in Europe specifically for NATO forces.

FEATURES

  • New lightweight, highly durable VTX RIPSTOP™ stretch fabric
  • Overall stretch for increased mobility & comfort
  • Accepts all of our AirFlex™ series combat kneepads (sold seperately)
  • Dedicated knife holder with reinforced opening
  • Multiple pass-throughs to cargo pocket to hold charges
  • Zip thigh pockets sized for phone
  • Adjustable padded waist with low profile die cut VELCRO® adjust tabs
  • Waistband lined with moisture wicking material
  • Set in low profile thigh cargo pockets with bellows at back for expansion, thermobonded flaps tuck cleanly into pockets
  • Cargo pockets conceal water bottle/magazine stabilizers
  • Mesh venting on all pockets for maximum airflow
  • VELCRO® waist closure with zip fly
  • Kneepad height and tension adjustments

 

 

 

Read more

Crye Precision GB4 Combat Shirt™

Crye Precision’s next generation of GB4 Combat Apparel features innovative, custom stretch VTX RIPSTOP™ fabric. Torso constructed with lightweight, high performance, flame-resistant jersey fabric. Invista’s T420 high tenacity nylon fiber makes it lighter and stronger in the sleeves. The Crye Precision GB4 Combat Shirt is designed to be worn under body armor, the integrated stretch allows for a slimmer cut with maximum mobility. Zippered shoulder pockets are low profile and engineered to reduce bulk while still allowing room for all essential gear. Zip collar for easy donning/doffing. Designed for use with all removable Crye Precision AIRFLEX™ ELBOW PADS (sold separately). Made in Europe specifically for NATO forces.

FEATURES
• New lightweight, highly durable VTX RIPSTOP™ stretch fabric
• Overall stretch for increased mobility & comfort
• Set in shoulder pockets with internal expansion, set in loop, low profile pen pockets, zippered welts
• VELCRO® tab closure at cuff
• Mid height zip collar
• Underarm panels shaped for enhanced mobility
• Internal elbow pad pockets
• Sleeves shaped for enhanced mobility
• Flatlocked seams for comfort
• Shaped hem, longer in the back

Read more

Crye Precision GB4 Field Pant™

Crye Precision’s next generation of Field Apparel features innovative, custom stretch VTX RIPSTOP™ fabric. Constructed with Invista’s T420 high tenacity nylon fiber to be light yet strong. The integrated stretch allows for a slimmer cut while maintaining maximum mobility. Pockets are low profile and engineered to reduce bulk while still allowing room for all essential gear. Mesh venting for maximum air-flow and breathability. Adjustable waistband. Designed for use with all removable Crye Precision AIRFLEX™ IMPACT KNEE PADS (sold separately). Made in Europe specifically for NATO forces.

FEATURES

  • New lightweight, highly durable VTX RIPSTOP™ stretch fabric
  • Overall stretch for increased mobility & comfort
  • Dedicated knife holder with reinforced opening
  • Cargo pockets conceal water bottle/magazine stabilizers
  • Zip thigh pockets sized for phone
  • Adjustable waist with low profile die cut VELCRO® adjust tabs
  • Waistband lined with moisture wicking material
  • Set in low profile thigh cargo pockets with bellow at back for expansion, thermobonded flaps tuck cleanly into pockets
  • Overall stretch for increased mobility
  • Mesh venting on all pockets for maximum airflow
  • VELCRO® waist closure with zip fly

Read more

Crye Precision GB4 Field Shirt™

Crye Precision’s next generation of Field Apparel features innovative, custom stretch VTX RIPSTOP™ fabric. Designed as a tailored utility shirt, the integrated stretch allows for a slimmer cut while maintaining maximum mobility—even under body armor. Chest pockets are low profile with flaps engineered to be tucked in for ease of access. Zippered shoulder pockets reduce bulk while still allowing room for all essential gear. Designed for use with all removable Crye Precision AIRFLEX™ ELBOW PADS (sold separately). Made in Europe specifically for NATO forces.

FEATURES

  • New lightweight, highly durable VTX RIPSTOP™ stretch fabric
  • Overall stretch for increased mobility & comfort
  • Set in shoulder pockets with internal expansion, mesh lined for ventilation, set in loop, low profile pen pockets, zippered welts
  • Hidden button placket
  • Set in chest pockets with thermo-bonded flaps, expansion bellows at side, die cut VELCRO® closures
  • Pocket flaps tuck cleanly into pockets
  • Sleeves shaped for enhanced mobility
  • VELCRO® tab closure at cuffs

Read more

Crye Precision Airflex Impact Combat Knee Pads

Crye Precision AIRFLEX™ IMPACT COMBAT KNEE PADS are the latest embodiment of Crye Precision’s integrated joint protection system. Crye Precision AIRFLEX kneepads offer enhanced impact protection, comfort, and flexibility by incorporating dual-density foam, a unique impact absorbing cap structure, and an expanded VELCRO® attachment area. Crye Precision AIRFLEX kneepads exceed impact protection requirements of test standard EN14404. These kneepads are specifically tailored to integrate with all styles of Crye Precision COMBAT PANTS™. Made in the US from US materials.

FEATURES

  • Flexible cap for mobility and durability
  • Unique cap design absorbs impact energy
  • Exceeds impact protection requirements of test standard EN14404
  • Dual-density foam body for greater comfort and protection
  • Vented body for breathability and reduced weight
  • Compatible with all styles of Crye Precision COMBAT PANTS™
  • Extended VELCRO® area for enhanced security
  • Vented for airflow
  • Berry compliant

Read more

G4 HOT WEATHER COMBAT PANT™

Crye Precision’s lightest, most breathable Combat Pant. The next generation Hot Weather Combat Apparel is engineered specifically for arid environments and features an extremely lightweight, fast-drying nylon ripstop fabric with MCS Blocker™ to wick away moisture and provide UV protection. Two different high-strength ripstop fabrics provide breathability, stretch, and reinforcement in areas of high wear. Pockets lined in mesh for maximum air-flow and accelerated dry times. Designed for use with removable AIRFLEX™ SERIES COMBAT KNEE PADS (sold separately). Overall minimal design to reduce weight and thermal burden. Made in the US from US materials. WWW.LWPATENTS.COM

FEATURES

  • Dedicated knife holder with reinforced opening
  • Charge loops & pass-through flashlight holder
  • VELCRO® fly closure
  • Zip thigh pocket sized for phone
  • Adjustable waist with low profile die cut VELCRO® adjust tab
  • Set-in thigh cargo pockets with bellow for expansion. Thermo-bonded flaps tuck cleanly into pocket
  • Durable, ultra-lightweight & fast drying fabric
  • Crotch gusset for enhanced mobility
  • Knee pad height and tension adjustments
  • Mesh ventilation behind knee pad & shaping for enhanced mobility
  • Padded waistband lined with moisture wicking material
  • Drawstring cuff opening
  • Accepts AIRFLEX™ SERIES COMBAT KNEE PADS 

Read more

G4 HOT WEATHER COMBAT SHIRT™

Crye Precision’s lightest, most breathable Combat Shirt. Engineered specifically for arid environments, the next generation Hot Weather Combat Apparel is extremely lightweight and designed to be worn under body armour and features an extremely lightweight, fast-drying nylon ripstop fabric with MCS Blocker™ to wick away moisture and provide UV protection. Fast-drying, moisture wicking Polartec® Power Dry® mesh jersey with antimicrobial X-Static fiber keeps you cool and dry. Extremely lightweight nylon ripstop reinforces areas of high wear. Minimal zip collar allows for easy donning/doffing. Overall minimal design to reduce weight and thermal burden. Made in the US from US materials. WWW.LWPATENTS.COM

FEATURES

  • Shoulder pocket with button closure and thermo-bonded flap
  • Adjustable thermo-bonded cuff tab
  • Flatlocked seams for comfort
  • Minimal zip collar
  • Shaped sleeve for enhanced mobility
  • Longer in the back to stay tucked in
  • Durable, ultra-lightweight & fast drying sleeve fabric
  • Moisture wicking knit fabric extended to cuff to enhance ventilation
  • NOTE: Does NOT accept AIRFLEX EBLOW PADS.

Read more

G4 HOT WEATHER FIELD PANT™

Crye Precision’s lightest, most breathable Field Pant. Engineered specifically for humid, tropical environments, the next generation Hot Weather Field Apparel features an extremely lightweight, fast-drying nylon ripstop fabric with MCS Blocker™ to wick away moisture and provide UV protection. Two different high-strength ripstop fabrics provide breathability and reinforcement in areas of high wear. Pockets lined in mesh for maximum air-flow and accelerated dry times. Designed for use with removable AIRFLEX™ IMPACT FIELD KNEE PADS (sold separately). Overall minimal design to reduce weight and thermal burden. Made in the US from US materials. WWW.LWPATENTS.COM

FEATURES

  • Durable, ultra-lightweight & fast drying fabric
  • Covered zipper thigh pockets
  • Crotch gusset for enhanced mobility
  • Internal knee pad pocket
  • Adjustable waist with low profile die cut VELCRO® adjust tab
  • Set-in thigh cargo pockets with bellow for expansion. Thermo-bonded flaps
    tuck cleanly into pocket
  • Articulated back knee seam
  • Built in lower leg gaiter for insect repellency
  • Drawstring cuff opening

Read more

G4 HOT WEATHER FIELD SHIRT™

Engineered specifically for humid, tropical environments, the next generation Hot Weather Field Apparel features an extremely lightweight, fast-drying nylon ripstop fabric with MCS Blocker™ to wick away moisture and provide UV protection. Two different high-strength ripstop fabrics provide reinforcement in areas of high wear. Pockets lined in mesh for maximum airflow and accelerated dry times. Button closures used throughout for quiet access to items. Overall minimal design to reduce weight and thermal burden. Made in the US from US materials. WWW.LWPATENTS.COM

FEATURES

  • Shoulder pocket with button closure and thermo-bonded flap
  • Adjustable thermo-bonded cuff tab
  • Shaped sleeve for enhanced mobility
  • Durable, ultra-lightweight & fast drying sleeve fabric
  • NOTE: Does NOT accept AIRFLEX EBLOW PADS.

Read more

G4 Female Fit Combat Pant

Crye Precision G4 Female Fit

Our G4 Female Fit Combat Pant features the same innovative, custom stretch VTX RIPSTOP™ fabric as the standard G4 uniform, with a design that is custom patterned to fit our female customers. The G4 Female Fit Combat Pant is constructed with Invista’s T420 high tenacity nylon fiber to be light yet strong. Integrated stretch and dedicated shaping around the hips allow for a slimmer cut with maximum mobility. Reduced front and back rise, and inseam lengths provide a more tailored fit throughout, while pockets are low profile and engineered to reduce bulk while still allowing room for all essential gear. Mesh venting for maximum air-flow and breathability. Optimised kneepad placement is designed for use with our removable AIRFLEX™ SERIES COMBAT KNEE PADS (sold here). All of this combined provides uncompromised performance built specifically for women.

* VTX Ripstop Fabric

* Reduced Sleeve Circumference

* Reduced Neck Opening

* Reduced Collar Height

* Minimised Shoulder Width

* Shortened Body Length

* Raised Chest Pockets

* Reduced Inseam Length

* Waist Shaping

* Increased Hip Mobility

Designed with the user in mind.

Read more

G4 Female Fit Combat Shirt

Our G4 Female Fit Combat Shirt features the same innovative, custom stretch VTX RIPSTOP™ fabric as the standard G4 Combat Shirt, with a design that is custom patterned to fit our female customers. The G4 Female Fit Combat Shirt torso is constructed with lightweight, high performance, flame-resistant jersey fabric. Invista’s T420 high tenacity nylon fiber cuts weight and increases durability in the sleeves; which feature a reduced circumference and raised armholes for enhanced mobility and a more ergonomic female fit. Designed to be worn under body armour, the integrated stretch allows for a slimmer cut with maximum mobility. The front seam bust shaping and minimised shoulder width provide for a slimmer profile and reduced bulk with the low-profile zippered shoulder pockets still allowing room for all essential gear. Reduced zip collar length for easy donning/doffing. Designed for use with all removable AIRFLEX™ ELBOW PADS (sold separately). All of this combined provides uncompromised performance built specifically for women.

FEATURES

  • Reduced zipper length
  • Set in shoulder pockets with internal expansion, set in loop, low profile pen pockets, zippered welts
  • Front seam bust shaping
  • Waist shaping
  • VELCRO® tab closure at cuff
  • Optimised elbow pad replacement, accepts our AIRFLEX™ ELBOW PADS (sold separately)
  • Shortened body length
  • Flatlocked seams for comfort

Read more

G4 Female Field Pant

The G4 Female Field Pant features innovative, custom stretch VTX RIPSTOP™ fabric. Constructed with Invista’s T420 high tenacity nylon fiber to be light yet strong. Integrated stretch and dedicated shaping around the hips allows for a slimmer cut with maximum mobility. Reduced front and back rise, and inseam lengths provide a more tailored fit throughout, while pockets are low profile and engineered to reduce bulk while still allowing room for all essential gear. Mesh venting for maximum air-flow and breathability. Adjustable waistband. Optimised kneepad placement designed for use with all removable AIRFLEX™ SERIES FIELD KNEE PADS (sold here). All of this combined provides uncompromised performance built specifically for women. Made in the US from US materials.

FEATURES

  • Dedicated knife holder with reinforced opening
  • Set in low profile thigh cargo pockets with bellow at back for expansion, thermobonded flaps tuck cleanly into pockets
  • Zip thigh pockets sized for phone
  • Adjustable waist with low profile die cut VELCRO® adjust tabs
  • Accepts our AIRFLEX™ SERIES FIELD KNEE PADS (sold here)
  • Waistband lined with moisture wicking material
  • VELCRO® waist closure with zip fly

Read more

G4 Female Fit Field Shirt

The G4 Female Field Shirt features VTX RIPSTOP™ fabric. The integrated stretch allows for a slimmer cut while maintaining maximum mobility – even under body armour. Reduced neck opening and shoulder width allows for a more ergonomic female fit. Raised chest pockets are low profile with flaps engineered to be tucked in for ease of access. Raised armholes and reduced sleeve circumference provide enhanced mobility and reduced bulk, with designated waist shaping and a shortened body length. Zippered shoulder pockets reduce bulk while still allowing room for all essential gear. Designed for use with all removable AIRFLEX™ SERIES ELBOW PADS (sold separately).

FEATURES

  • Set in shoulder pockets with internal expansion, mesh lined for ventilation, set in loop, low profile pen pockets, zippered welts
  • Reduced CF placket width, placket buttons right over left
  • Raised chest pockets are set in with thermo-bonded flaps, expansion bellows at side, die cut VELCRO® closures, pocket flaps tuck cleanly into pockets
  • VELCRO® tab closure at cuffs
  • Mesh internal elbow pad pockets with optimised placement, accepts our AIRFLEX™ SERIES ELBOW PADS (sold separately)
  • Waist shaping panel

Read more

Alsea 8″ Brown 400G

Named after an Oregon hunting unit that covers territory from mountains to valley and rivers to ocean, the Alsea was built to be the boot to handle it all. Gore-Tex waterproof, breathable protection makes this boot ready for unpredictable weather. The speed hook lacing, Danner Plyolite™ midsole and the grippy traction of the Alsea outsole mean that there’s no terrain too intimidating.

FULL-GRAIN LEATHER & TEXTILE UPPER

For a highly abrasion resistant upper, we combine our premium full-grain leather with durable water repellent (DWR) treated nylon panels.

GORE-TEX (GTX)

100% waterproof and breathable, GORE-TEX liners ensure that no water gets in, while allowing sweat and moisture to get out.

400G PRIMALOFT® INSULATION

PrimaLoft® Gold Insulation offers best-in-class insulation for repeated compression and durability, making it the go-to choice for insulated footwear.

REMOVABLE ORTHOLITE FOOTBED

Three layers of varying density are combined for maximum cushioning and support. The entire footbed is made of open-cell polyurethane for better heat dissipation and air circulation.

DANNER PLYOLITE MIDSOLE

Danner® Plyolite™ midsole offers lightweight comfort and shock absorption.

DANNER® ALSEA OUTSOLE

The Danner® Alsea outsole offers grippy traction in uneven terrain.

HOW IT FITS

The 851 last is an update to our popular 850 last. This last fits true to size with an athletic and supportive fit while providing ample room in the toe. Offering a specific heel shape that locks the heel in place for better fit and comfort on the back end of the boot, this supportive fit is ideal for those needing high mileage performance from their gear.

Read more

Garmin tactix® Delta – Sapphire Edition

The Garmin tactix® Delta – Sapphire Edition is ruggedly designed to meet military standards, this premium GPS smartwatch offers specialised tactical features as well as mapping, music, advanced training features and more.

Specialised Tactical Features:

  • Night Vision Capability
  • Jumpmaster Mode
  • Stealth Mode
  • Kill Switch
  • Dual-Position Format
  • Projected Waypoints

Read more

Mechanic Wear Pursuit D5

  1. Thermoplastic Rubber (TPR) closure creates a secure fit to your wrist.
  2. Internal layer of Armortex® delivers EN 388: 2016 level D & ANSI A5 blade-cut resistance to the palm and fingers.
  3. Breathable TrekDry keeps your hands cool and comfortable.
  4. Three-dimensional patterning conforms to the natural curvatures of your hand.
  5. Durable synthetic leather palm infused with touchscreen technology.
  6. Nylon carrier loops for storage.
  7. Machine washable.

Read more

Oakley SI Ballistic M Frame 3.0 Multicam

The Oakley SI Ballistic M Frame 3.0 surpasses ANSI Z87.1 Industrial Standards for high-mass and high-velocity impact protection. The M Frame 3.0 additionally meets MIL SPEC MIL-PRF 31013. All lenses are made of pure Plutonite®, a proprietary material that offers the highest level of optical clarity available in eyewear. It also features a clip that holds the lens and frame together providing more secure support.
material.

  • Lenses feature Oakley’s HDO Optics with Polaric Ellipsoid Technology
  • Lenses feature a permanent anti-fog coating on the back surface
  • UV protection of Plutonite® lens material that filters out all of UVA / UVB & harmful blue light up to 400 nm wavelength
  • Meets or exceeds high mass and high velocity impact requirements per ANSI Z87.1-2003/2010
  • Meets or exceeds ballistic fragmentation impact standards per MIL PRF-31013, Clause 3.5.1.1.
  • Secure fit even under wet conditions via Hydrophilic Unobtainium® nose pad
  • Clear lens features 89% visible light transmittance, suitable for use in low light to no light conditions
  • Persimmon lens features 69% visible light transmittance, suitable for use in low light to no light conditions
  • Grey lens features 15% visible light transmittance suitable for bright light, meets MCEPS neutrality and chromaticity requirement

FRAME

  • Thin stem technology enable compatibility with over-ear hearing protection and communication systems
  • System features quick, tool-free lens change
  • Ultra lightweight design (1.05-ounce total weight)
  • Full compatibility with helmet-mounted night vision devices
  • Full compatibility with MICH, ACH, CVD, PASGT, and Crye™ Helmets
  • Impact and chemical resistant O-Matter® frame

Read more

Firepower

Arnold Defense

Arnold Defense is inherently committed to manufacturing the world’s most reliable and
affordable 2.75-inch rocket launchers. Through our innovation, integrity, dedication, technical expertise and customer-first focus, we produce the very best rocket launchers in the world.
We will protect today’s warfighter.

Read more

Izlid Ultra

The new standard for JTAC/FAC use, the IZLID Ultra maintains all the power and stability of its predecessor, the IZLID1000P, but at a fraction of the original weight and size. The IZLID Ultra combines the rugged and dependable features of all IZLID products in a smaller form factor and, at 335g, is capable of being either handheld or weapon mounted.
The IZLID Ultra is ideal for roping in aircraft and marking targets at night. Its ultra bright beam can be viewed by high-altitude aircraft or in high ambient light conditions with standard NODs.

Read more

MAWL-DA

The MAWL-DA is a high power infrared and visible green aiming and illumination laser for individual carbines. Offering improved ergonomics, interface, and performance, the MAWL-DA has been designed from the ground up around the evolved needs of the modern night fighter.

Designed to address use of space and ergonomics shortcomings of lasers on short carbines like the SOCOM Mk18, the MAWL-DA mounts offset from the rail to minimize impact on hand position and optic field-of-view. Shooting with a laser should feel the same as shooting without one. Now it does.

The MAWL-DA eliminates granular illuminator adjustment and complex multi-position switches and instead consolidates these choices into the settings you need: Close Range, Mid Range, and Long Range, with the power and divergences appropriate for each.

Read more

CADEX PRECISION RIFLE – CDX-TAC

The CDX-30 TAC, CDX-300 TAC and CDX-33 TAC precision rifles are cost efficient solutions for law enforcement agencies or the civilian market that do not see an advantage in a folding stock mechanism. Same reliability and accuracy combined into a well proven package at a fraction of the cost.

Read more

Gorilla Ammunition 6.5

Gorilla Ammunition 6.5 Creedmoor 140gr Berger Hybrid Target

For match grade accuracy, look no further than the 6.5CM 140gr Berger Hybrid Target.

Component selection is only the start to our top quality ammunition. The Gorilla Ammunition manufacturing process ensures consistency by pairing high end linear loading equipment with multi stage in-process inspections by highly trained machine operators with a final inspection of each and every round by our quality inspectors to ensure only ammunition that meets our rigorous specifications makes it into the box.

Technical Specifications

  • Caliber: 6.5 Creedmoor
  • Projectile: 140gr Berger Hybrid Target
  • Muzzle Velocity: 2640 FPS (22″ Barrel)
  • Ballistic Coefficient (G1): 0.607

 

 

Read more

HORUS Virtual Range Simulator (VRS)

Horus is breaking new ground in the world of virtual small arms trainers. The HoVR VRS is a comprehensive long-range dry fire simulator. Our proprietary VR software integrates the Horus ATRAG ballistic calculator, a custom rifle controller, and HTC Vive Pro Hardware to deliver a small, portable, and cost effective range.

With the HoVR VRS kit users can recreate any weapon system and physical environment to practice target engagement. Shooters can practice basic and advanced marksmanship techniques from holding elevation and windage to engaging moving targets in wind. The VRS kit is small and portable allowing for sustainment training to take place anywhere between live fire evolutions.

Included

  • Over 10 training modules
  • Recreate your own gun
  • Shoot in any atmospheric condition
  • ATRAG Ballistic Calculator
  • Moving Targets
  • Custom Range Builder
  • Stored in (1) 1730 Pelican case
  • Small footprint 8’ x 8’
  • Portable
  • Advanced Reticle (TREMOR3, TREMOR5, H59 …)
  • Visual feed back
  • Tailored Training

Read more

LEONARDO INOD BLOCK III

Clip-On Visibility in Day or Night and Under Degraded Conditions

The Improved Night / Day Observation Device (INOD) Block III thermal weapon sight provides night/day and degraded battlefield or weather condition visibility for the Special Operation Forces (SOF) Sniper by easily clipping the device in front of the existing day scope. The clip-on configuration allows the operator to maintain the existing day scope zero.

The INOD employs a completely passive, micro-cooled mid-wave infrared (MWIR) technology to provide a high-quality, large format, 640 x 480 resolution image, usable with day scope magnifications from 5x to > 25x. The proven range detect performance will match or exceed current Sniper Weapons Systems capabilities. The INOD has been ruggedized for use with all SOF and U.S. Army Sniper Weapon Systems. It is ideal for extended range target detection and identification, observation of environmental indicators, and is capable of tracking bullet trajectory making it the preferred Night Vision Device (NVD) for the Sniper or Reconnaissance role. The hot-swap battery capability and / or external power feature allows persistent over watch on extended missions.

The rear facing focus knob and controls are optimized for sniper conops. The wired stick remote control replicates INOD keypad functionality and enables one-handed gloved operation. Super elevation adjust is incorporated into the mount to accommodate targeting at various ranges while ensuring target visualization.

Improved Night / Day Observation Device (INOD) Block III

  • Rapid identification, acquisition, and engagement of targets
  • Passive enemy engagement and threat detection
  • Large-format imagery in degraded battlefield and weather conditions
  • Provides bullet trajectory observation
  • In-line, clip-on sight for easy attachment in front of existing pre-zeroed day scope
  • Wired, remote control pendant designed for ease of use and low profile integration
  • Super Elevation mechanism allows for target engagement to extreme range of weapon sight

Read more

POF 5.56mm Renegade

The Renegade is how POF-USA does basic. The features in the Renegade go far beyond the low entry barrier that many manufacturers obtain but don’t care to surpass. This barrier of entry is known as MIL-SPEC. As you’ll see, it is anything but basic. In fact, the only parts that can be considered basic are the forged lower receiver and flat-top upper receiver.

The heat sink barrel nut dissipates heat quicker than any system on the market. The Dictator 9-position adjustable gas block, with straight gas tube, let’s you tune this rifle to be as smooth and flat shooting as possible, no matter the ammo load out. At this price, and even well beyond it, you simply will not find features like this on any other rifle.

The 14.5” Renegade rail with M-LOK compatibility and 4 integrated QD slots provides maximum comfort, hand placement, and accessory mounting options. Topped off with a 16.5” nitride heat treated barrel, you have a 1 MOA guaranteed rifle suited for any patriot.

CALIBER 5.56 x 45mm NATO (.223 REM)
CHAMBER E2 Dual Extraction Technology
ACTION Semi-auto, direct impingement
UPPER MIL-SPEC upper receiver
WEIGHT 6.3 lbs / 2.86kg (empty)
BARREL 16.5” / 41.91cm match-grade nitride heat-treated
Puritan barrel
RIFLING 1:8, 1/2×28 barrel threads
LENGTH 34” / 86.36cm (collapsed)
FINISH Black anodized
GAS BLOCK 9-position adjustable midlength DIctator gas block
HANDGUARD 14.5” M-LOK Renegade free-floating rail with five
integrated QD sling mounts
MUZZLE DEVICE A2 flash hider
TRIGGER MIL-SPEC trigger
FURNITURE Mission First Tactical
ACCURACY MOA with proper ammo and shooter ability
FIRE CONTROL MIL-SPEC Puritan lower receiver
MAINTENANCE Standard receiver/carrier group field strip
procedures.

INCLUDES

  • Nitride heat-treated bolt carrier group (includes cam pin)
  • 6-position anti-tilt buffer tube
  • Mission First Tactical 30-round magazine

Read more

POF-USA Revolution .308

THE REVOLUTION™  IS THE NEW .308 RIFLE THAT HANDLES LIKE A 5.56 – BECAUSE IT’S THE SAME SIZE AND WEIGHT AS ONE. This isn’t a stripped down rifle that’s saving weight by making extra cuts or lacking the battle rifle features you’re accustomed toPatriot have worked magic into the Revolution by using a 5.56 bolt carrier and other 5.56 parts allowing for a shorter overall receiver size and reduced weight.

This also isn’t a normal small frame .308, it’s smaller! The Revolution features many 5.56 parts; such as charging handle, bolt carrier, cam pin, buffer, heat sink barrel nut, handguard, and 5-position gas piston operating system. The barrel extension, bolt assembly, upper, and lower receiver are the exact same size as those on an AR15.

Weighing in at 7.3 lbsthe Revolution features the new Edge Handguard with four built-in QD mounts, and is packed with all you’ve come to expect from POF-USAFully ambidextrous billet receiver set, high phosphate nickel coated bolt carrier group, 5-position adjustable gas piston, single stage match grade trigger, and moreWith the redesigned triple port muzzle brake recoil management is not an issue. YOU MAY HAVE JUST FOUND YOUR “ONE GUN.”

Read more

Alpha TARAC

Need to know

 

Engage long-range targets without holdover, range estimation, or thinking.

Become a marksman, take the thought process out, and just aim centre with Alpha TARAC.

 

How it works

 

The Alpha TARAC is a prism wedge that optically shifts your target image higher so you aim higher to compensate for bullet drop. The result is an instant, long-range zero configured to increase your max point blank (MPB) range.

 

If the target exceeds 300 yds or three football fields (refer to Operator’s Manual), deploy the Alpha and aim centre .

 

Models

 

6061 Standard

Best-in-Class: Cost Effectiveness

 

7075 Elite

Best -in-Class: Durability

Read more

WARHORSE CLEDE

The Clede Field Bag hits the in between on size and weight versus the world famous Saracen and Comanche bags.  Sometimes the Saracen is too big and sometimes the Comanche is too small.  Clede is in the Goldilocks Zone of the field bags.

 

All our field bags come with a non-slip top and the ability to attach straps.  Clede is offered in two versions; Regular and the Yaga Edition (so named by a SF friend of ours, Baba Yaga).  The Regular version has a nonslip top (Kevlar fabric sandwiched between two tough layers of Neoprene – HANK) and our regular straps that are included.  The Yaga Edition has HANK as its entire top and bottom piece underneath the bag, 4 QD mounts, and a special QD strap with the HANK fabric in the center of the strap.  This strap system allows for less rolling during movement and is a great way to hold your binos if quick movement is needed.

 

We are also offering the new Git-Lite fill as a selection for the Clede.  It takes the bag from 4.75 lbs to 2 lbs.  Ounces make pounds, pounds make pain.

 

Clede was a Special Forces horse used by ODA 595, 3rd BN, 5th SFG, Mission Code: Tiger02.  Their task was to overthrow the Taliban.  Clede was part of what would become Task Force Dagger.  We have it on good authority that Clede was the only horse worth a hoot.  To honor that horse and those men we are proud to introduce Clede to our line up of amazing shooting support field bags.

Read more

RAPTAR – S™

The RAPTAR-S is the next step in precision for extremely long ranges. In addition to the Infra-red (IR) laser, visible laser, IR flood and laser range finder (LRF) the RAPTAR-S features an applied ballistics solver. Compatible with mobile devices, users can input desired load data that directly syncs with RAPTAR-S for ballistic solutions. When paired with BAE thermal sights or UTC SWIR HWH-SMS™ camera, the RAPTAR-S provides a ballistic solution to the disturbed reticle for faster engagements. Whatever the caliber or conditions, the RAPTAR-S can calculate corrections with speed and efficiency, increasing first round hit probability.

Read more

RAID-X

Introducing the next generation of aiming lasers. The RAID-X (Ruggedised Aiming/Illumination Device) offers smaller, lighter and superior performance. Powered by one (1) CR123 3V battery, the RAID-X features a red visible laser, infrared (IR) laser and variable IR illuminator all co-aligned with one windage and elevation adjustment. Aside from size and weight reduction, the RAID-X
boasts ultimate beam clarity and uniformity aiding in target identification and situational awareness. An ergonomically located focus wheel allows on the fly adjustment of the IR illuminator with three power modes to adjust laser settings from low, medium or high power for various distances and mission requirements. The RAID-X securely mounts low-profile to 1913 style picatinny rails using two thumb screws without interfering with optics or iron sights.

Read more

Wilcox BOSS Sight

Designed specifically for the 300 AAC blackout cartridge, the new BOSS 300 (Black Out Sighting System) features
a miniature reflex sight, red visible laser, infra-red (IR) laser and fixed IR illuminator. The BOSS 300 is truly unique allowing the user to shoot both supersonic and subsonic ammunition with the flip of a switch – without having to rezero the weapon. This is achieved by co-aligning the reflex sight to the lasers and illuminator which all travel on our patented trajectory switch. Powered by one (1) AA battery this lightweight system delivers repeatable accuracy you can’t find with any other sighting system.

Read more

Hybrid PATRIOT 5510

With exclusive 5500 psi bottles and an unprecedented 10 year warranty, the Hybrid PATRIOT 5510 offers responders four breathing modes – SCBA, PAPR, APR, and SAR. The Hybrid PATRIOT 5510 is the next generation in hybrid life support systems offering innovative electronics, equipped for CBRN environments, improved monitoring capability, revolutionary power supply system, and world class breaching/cutting torch options.

Read more

QUICK RESPONSE KIT EMERGENCY SCBA

The QRK (Quick Response Kit) provides operators and first responders with a simple, compact and lightweight 30 minute SCBA (self contained breathing apparatus) system that can be utilized on its own or used in conjunction with the Hybrid Patriot 5510®. The QRK is ideal for personnel who are tasked with containing situations and offering immediate protection and assistance until backup arrives. The QRK’s compact design allows it to easily be stowed/concealed inside the custom sling pack and quickly deployed when needed. The pack features several pockets, pouches, MOLLE and Hook and loop for other essential items.

Compatible with the Hybrid Patriot 5510, The QRK can be used for SubT, man-down rescue, VIP extraction, hand-off air supply and undercover/low vis operations where hazardous atmospheric environments are present or potentially exist. Once the QRK is attached onto the Hybrid Patriot 5510 center chassis, the end user is provided with the same capabilities (SCBA, PAPR (powered air purifying respirator), APR (air purifying respirator) and SAR (supplied air respirator) offered by the Hybrid Patriot 5510.

Read more

UAV & COUNTER UAV

NIGHTFIGHTER S

Compact, man-portable system. Broad spectrum RF coverage demonstrated effective against drone threats at distances in excess of 2.5km

Read more

NIGHTFIGHTER X

Highly portable ‘one piece’ solution with built-in electronics & hot swap battery technology, ideal for covert deployment.

Read more

STEEL ROCK ODIN

Odin® is a compact, high-performance RF effector module designed specifically for rapid OEM integration into a broad range of remote-operated Counter-UAV platforms including fixed, vehicular and marine systems.

Part of SteelRock Technology’s portfolio of C-UAV solutions, Odin® offers class-leading RF threat mitigation performance – field proven in the NightFighter™ portable C-UAV system – in a ruggedised, integration-friendly modular form factor.

Odin® is ideally suited to integration in medium- and large-scale networked C-UAV system deployments. Aggregated signals from multiple sensor arrays (passive RF, radar optical, IR) provide wide-area situational awareness of drone-based threats: this information can control multiple Odin® installations, providing a highly effective area-wide C-UAV threat mitigation capability at airports and other sensitive installations.

Read more

VELVET WASP

AERIAL PAYLOAD CARRIAGE & RELEASE SOLUTION

Precision solution for secure aerial carriage and pin-point release of a broad range of emergency/humanitarian supplies and other payloads in otherwise inaccessible areas. Advanced gravitational parachute release system with certified military specification carriage, capable of delivering 40kg maximum take off weight. Aerial Payload Carriage & Release Solution

Precision solution for secure aerial carriage and pin-point release of a broad range of emergency/humanitarian supplies and other payloads in otherwise inaccessible areas. Advanced gravitational parachute release system with certified military specification carriage, capable of delivering 40kg maximum take off weight.

Read more

PROTECTOR

Counter-IED Standoff Disruptor

Highly effective standoff solution disables Improvised Explosive Devices and mines under remote operator control from the air or ground. Also ideal for door breaching.

Read more

DRONOS

Long-range Counter-UAV RF Effector Solution

Neutralises a wide range of unmanned drone threats, including air, ground and surface-based autonomous vehicles. Proven counter-drone performance using highly directional RF technology featured in the NightFighter® C-UAV system. Operational range in excess of 2.5km.

Read more

FLIR Payload Development Kit (PDK)

The Payload Development Kit (PDK) further extends payload development to end users, enabling the rapid development of other mission-specific payloads. The PDK provides a full set of payload development tools for electrical, mechanical, and software integration.

  • UPPLEMENTARY EO/IR PAYLOAD

    Provides day and night situational awareness when carrying non-optical payloads, and secondary view-angle intelligence, surveillance, and reconnaissance capability.

  • SENSOR DATA AND POWER FROM THE AIRCRAFT

    Removes the need for developers to integrate batteries, GPS or other sensors in their payload by providing access to services onboard the aircraft.

  • SECURE IP NETWORKING

    Leverage the all-digital AES-encrypted network to integrate payload data and controls with a ground station.

Read more

FLIR Tether Kit – Continuous Aircraft Operation

Tether Kit – Continuous Aircraft Operation for R70 & R80D Payload

The Tether Kit is a modular, highly transportable system enabling persistent mission support.

  • CONTINUOUS POWER TO AIRCRAFT AND PAYLOADS

    Flight durations of 24 hours for continuous mission support.

  • RAPID RECONFIGURATION BETWEEN FLIGHT MODES

    Modularity permits conversion between free flying and tethered modes in minutes.

  • SUPPORT FOR R70/R80D AND THIRD PARTY PAYLOADS

    Wide range of possible mission set: use either FLIR payloads or your own application-specific payload enabled by the Payload Development Kit (PDK).

Read more

FLIR Unmanned Development Kits (UDK)

Unmanned Development Kits (UDK)

 

The Unmanned Development Kits (UDK) further extend the SkyRanger platform for end users, enabling complex integrations and rapid development of capabilities to meet tomorrows evolving mission sets. The UDK provides a full set of APIs, electro-mechanical models, tools and development hardware to enable meaningful native integrations and provide capability extension.

  • APPLICATION DEVELOPMENT

    Provides partners and integrators access to a full suite of aircraft and payload controls, media and telemetry.

  • PAYLOAD DEVELOPMENT

    Enables 3rd party integration of sensors and hardware. Access to native aircraft power, telemetry and data pipe to the ground.

  • MCS PLUG-INS

    Applet architecture to customise the FLIR MCS GCS. Create custom buttons and UX elements, display PDK data or render objects as layers on the map.

Read more

Black Hornet PRS

The FLIR Black Hornet PRS equips the non-specialist dismounted soldier with immediate covert situational awareness (SA). Game-changing EO and IR technology bridges the gap between aerial and ground-based sensors, with the same SA as a larger UAV and threat location capabilities of UGVs. Extremely light, nearly silent, and with a flight time up to 25 minutes, the combat-proven, pocket-sized Black Hornet PRS transmits live video and HD still images back to the operator. Sold to qualified purchasers.

 

Game-Changing, Life-Saving Nano UAV Technology

  • SQUAD-LEVEL IMMEDIATE COVERT SITUATIONAL AWARENESS

    Save lives and minimize collateral damage. Detect and identify threats day and night without being detected. Increase speed and expand maneuver options.

  • COVERT AIRBORNE SENSOR

    Extraordinarily low visual and audible signatures and a light, small profile allow covert operation and increased security for dismounted soldiers.

  • BEYOND VISUAL LINE-OF-SIGHT CAPABILITY

    Expand visual range in complex and urban environments. Rapidly engage targets beyond visual line-of-sight, and conduct real-time weapon effectiveness assessment.

Read more

InstantEye MK-3

The InstantEye Mk-3 systems feature state-of-the-art, all-digital data communications and data encryption. The systems’ enhanced onboard computing power enables features such as vision-based navigation, GPS-denied navigation, and advanced video processing.  All systems are field packable and available with extended duration Mission Batteries.

The D1 and D2 variants of the systems represent different communications frequencies, to better meet a range of customer application requirements.  All systems are equipped with organic video (5 MP) and thermal imaging systems as well as still photo and geo rectification capability for accurate target location.

Read more

EQUIPMENT

C2R CMAS – Plate Carrier Config

The Commando Modular Assault System is a new, configurable load-carriage system designed from the ground-up. It can be set up in multiple configurations to suit user requirements and roles Based around the C2R Fast CBAV, the system is complimented with a chest rig adaptor kit and assault pack.

The core system consists of:

 

  1. PLATE CARRIER
  2. CHEST RIG ADAPTER
  3. ALTERNATIVE CUMMERBUNDS
  4. ASSAULT BACKPACK
  5. MODULAR ARMOUR PACK

 

Utilising these components, the system can be easily configured by the user to optimise for the environment and levels of ballistic protection required. The CMAS achieves this with minimal component parts for reduced complexity and true versatility in the field.

The system also incorporates the following features:

• Field repairability (All load-bearing buckles can be replaced in the field)

• Interchangeable cummerbunds (can be set for Velcro or quick-release buckle)

• Integrated hydration system

• Shoulder release mechanism

 

PLATE CARRIER CONFIG:

Affords the user ballistic protection front and rear. The shoulder pads and magazine rack can be removed to provide a lower profile for operations such as: discreet or low-vis, personal protection.

Read more

C2R CMAS – Chest Rig With Rear Plate Config

The Commando Modular Assault System is a new, configurable load-carriage system designed from the ground-up. It can be set up in multiple configurations to suit user requirements and roles Based around the C2R Fast CBAV, the system is complimented with a chest rig adaptor kit and assault pack.

CHEST RIG WITH REAR PLATE CONFIG:

In this configuration, it provides the user with the ability to rapidly transition to full ballistic protection whilst prioritising an open front during intense physical activities, such as skiing & patrolling.

Read more

C2R CMAS – Chest Rig Config

The Commando Modular Assault System is a new, configurable load-carriage system designed from the ground-up. It can be set up in multiple configurations to suit user requirements and roles Based around the C2R Fast CBAV, the system is complimented with a chest rig adaptor kit and assault pack.

CMAS CHEST RIG CONFIG:

The full chest rig provides load carriage and functionality for reconnaissance and patrol activity.

Read more

C2R CMAS – Chest Rig Skeletal Config

The Commando Modular Assault System is a new, configurable load-carriage system designed from the ground-up. It can be set up in multiple configurations to suit user requirements and roles Based around the C2R Fast CBAV, the system is complimented with a chest rig adaptor kit and assault pack.

CMAS CHEST RIG SKELETAL CONFIG:

Provides additional carriage for snipers or users who require additional ammunition during offensive action. Ideally suited to be worn in conjunction with belt kit.

Read more

C2R CMAS – Base Vest

The Commando Modular Assault System is a new, configurable load-carriage system designed from the ground-up. It can be set up in multiple configurations to suit user requirements and roles Based around the C2R Fast CBAV, the full system is complimented with a chest rig adaptor kit and assault pack.

Read more

Core Survival – HEL-STAR 6®

HEL-STAR 6® is a multi-function helmet mounted LED light designed for airborne/MFF, tactical and other military operations.
HEL-STAR 6® combines the basic features of the earlier HEL-STAR 4® & HEL-STAR 5® multi-function marker lights into a compact, integrated design with enhanced omni-directional visibility and easy battery replacement.

The newly refined HEL-STAR 6® Gen III offers a sleek design, integrated tie downs, battery changes without tools, and advanced electronics, including a field re-reprogramming option.

Sliding switches enhance tactile feel and provide positive, intuitive control between the two operating modes and four user-defined functions. Functions can be selected from virtually any combination of White, four different color options, and IR – either flashing or steady. Variable flash rates, intensities and coded signals provide expanded IFF capability.

Independent testing has confirmed that the HEL-STAR 6® Gen III exceeds the FAA’s 3 statute mile visibility requirement and is shock and vibration resistant, dustproof, and open sea waterproof to 130 fsw (laboratory 300+ feet).

HEL-STAR 6® is built on a platform that allows new technology to be incorporated as it becomes available. As mission demands shift and expand, HEL-STAR 6® continues to evolve with changing user needs.

Wireless field re-programming capability is available upon request. Requires the purchase of a Programming Interface Module (PIM).

Other Operating Colors/Signal/Intensity Codes are available. Please contact us or one of our distributors for assistance in determining the best configuration for your operational needs.

Read more

LVS™ BASE VEST

The LVS™ system sets the standard for concealable body armor. Our proprietary three dimensional forming technology allows us to shape the vest to directly match the contours of the human body delivering an unprecedented level of concealment and comfort that only this production process can deliver. Because it is molded, the armor will not crumple and fold up in the bottom of the carrier. In fact, the LVS™ BASE VEST requires no external carrier at all. This is due to our unique “Insert As Vest™” architecture. This construction greatly reduces bulk and visual printing. The LVS™  system is extremely versatile. A wide range of optional covers allow the same armor panels to be quickly swapped between vest configurations. For instance a patrol vest can instantly become a tactical entry vest.. or anything in between. Additional side and abdomen armor panels are available to add even more coverage. The LVS™ armor is NIJ IIIA Certified. Made in the US from US materials.

FEATURES

  • Our proprietary IAV (Insert As Vest™) architecture dramatically reduces bulk and printing
  • 3D formed armor panels match the human body – delivering enhanced comfort & concealment
  • Base vest includes 2 built-in pockets suitable for radio, rifle mag, pistol, or pistol mags
  • Anti-microbial fabrics used throughout
  • Proprietary forming technique eliminates crumpling of armor
  • Wide range of optional carriers allow one system to economically cover many roles from low-vis to overtly tactical
  • Optional side armor panels are available
  • 2” and 4” elastic side straps provided with vest
  • THREAT LEVEL: CERTIFIED NIJ-0101.06 TYPE IIIA

Read more

LVS™ TACTICAL COVER

The LVS™ TACTICAL COVER lets you easily convert your low-vis vest into a full tactical rig. It’s lightweight and simple yet is packed with useful features. It includes our patented SKELETAL™ CUMMERBUND, 4 built in mag/radio pouches, heavy duty aluminum shoulder hardware, chest rig attachment loops on front, pack attachment loops on rear, and is compatible with any AVS™ front flap. Made in the US from US materials.

FEATURES

  • Easily converts your low-vis vest into full tactical vest
  • Lightweight and simple
  • Includes 3 BAND SKELETAL™ CUMMERBUND
  • 4 built in mag/radio pouches
  • Heavy duty aluminum shoulder hardware
  • Chest rig attachment loops on front
  • Pack attachment loops on rear
  • Ample VELCRO® brand loop on front and rear for agency ID patches
  • Compatible with any AVS™ front flap

Read more

Crye Precision™ Avs™ 1000 Pack

The AVS™ 1000 PACK is a streamlined, lightweight assault pack designed to provide the user with a variety of access and attachment options. It can be configured as a standalone pack, a rear plate bag replacement, or attached directly to the plate carrier (or virtually any vest) to allow quick access without redundant pack straps

Read more

Garmin tactix® Delta – Sapphire Edition

The Garmin tactix® Delta – Sapphire Edition is ruggedly designed to meet military standards, this premium GPS smartwatch offers specialised tactical features as well as mapping, music, advanced training features and more.

Specialised Tactical Features:

  • Night Vision Capability
  • Jumpmaster Mode
  • Stealth Mode
  • Kill Switch
  • Dual-Position Format
  • Projected Waypoints

Read more

MAGPUL MS4® Dual QD Sling GEN2

Filling the same mission requirement as the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but instead of Magpul Paraclips™ it features two heavy-duty push-button QD Sling Swivels along with a custom steel connection ring to allow one to two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling Mounts.

The MS4 Dual QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.

Made in U.S.A. and 100% Berry Amendment compliant.

FEATURES

  • Heavy-duty push-button Quick Disconnect Sling Swivels for both one and two-point attachment
  • Compatible with buttstocks, end plates, receivers, and hand guards that have a push-button QD socket
  • Durable, precision-cast steel QD D-Ring allows for quick transition from one to two-point mode and is finished with Melonite for extreme resistance to wear and corrosion
  • Custom 1.25 inch wide nylon webbing material is strong and wear resistant while remaining anti-chaff for user comfort
  • Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
  • Colored webbing has Near Infrared (NIR) treatment to reduce IR signature

Read more

MAGPUL Magpul® Bipod for M-LOK

The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

 

Durable & Lightweight

The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

 

Innovative, Adjustable, & Easy to Use

Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

 

Smooth & Unobtrusive

From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

 

Functional Feet

The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

Read more

MAGPUL PMAG® 25 LR/SR GEN M3™ Window

The 7.62×51 NATO (.308 Winchester) PMAG 25 LR/SR GEN M3 Window is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 25-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover.

Designed specifically for SAAMI-spec ammunition, the PMAG 25 LR/SR also features transparent MagLevel™ windows to allow rapid visual identification of approximate number of rounds remaining.

Made in U.S.A.

FEATURES

  • Optimized for use with SAAMI-spec 7.62×51/.308 Winchester ammunition
  • Commercial rifle compatibility includes the Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, Ruger Precision Rifle, S&W M&P10, SIG716, and others*
  • Next-generation impact and crush resistant polymer construction
  • Constant-curve internal geometry for smooth feeding
  • Anti-tilt, self-lubricating follower for increased reliability
  • High-quality stainless steel spring, black-oxide coated (MIL-DTL-13924D)
  • Anti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for easy determination of rounds remaining from 1 to 25
  • Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
  • Paint pen dot matrix panels on the bottom of the body to allow for identification marking
  • Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many pouches
  • Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage during storage and transit

*NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.

Read more

MAGPUL PMAG® 30 AR/M4 GEN M3™

The next-generation PMAG 30 GEN M3 is a 30-round 5.56×45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

Made in U.S.A.

FEATURES

  • Next-generation impact and crush resistant polymer construction
  • Modified dimensions allow for wider compatibility with non Colt-spec platforms
  • Constant-curve internal geometry for smooth feeding
  • Anti-tilt, self-lubricating follower for increased reliability
  • Long life USGI-spec stainless steel spring
  • Over-travel insertion stop on the spine
  • Ribbed gripping surface and new aggressive front and rear texture for positive magazine handling
  • Paint pen dot matrix panels on the bottom of the body to allow for identification marking
  • Flared floorplate aids magazine handling and disassembly yet is slim enough for use with many double and triple pouches
  • Pop-off Impact/Dust Cover to minimize debris intrusion and for ammunition protection in storage and transit

Read more

MAGPUL PRS® GEN3 Precision-Adjustable

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment.

With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting.

Made in U.S.A.

FEATURES

  • Mounts to rifle-length receiver extension tube without A2 spacer but will also accommodate mil-spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included)*
  • Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMG
  • Rubber butt-pad provides positive shoulder purchase to prevent slippage and is adjustable for both cant and height
  • Machined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents
  • Steel adjustment shafts finished with Melonite® for wear and corrosion resistance
  • All aluminum components finished with MIL-A-8625F, Type III, Class 2 hard anodizing
  • Bottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopod
  • Sling Mounts
  • Front/Rear – rotation-limited QD sling swivel mounts (swivels not included)
  • Rear – 1.25″ aluminum sling loop (left-right reversible)

Read more

NP Aerospace’s suite of hard body armour delivers ultra-lightweight protection against a range of ammunition. The portfolio is split between a variety of standalone and in-conjunction with plates for discreet covert operations, NIJ Level III and special threats, as well as body armour to stop specifically identified armour piercing rounds.

LASA LWA IV SA06

The LASA LWA IV SA06 is our highest threat body armour plate, providing lightweight ballistic protection against a range of armour piecing threats, including the 7.62 mm AP M2, 7.62mm B32 API, 7.62mm BZ API and SS109 round (green tip).

Weighing just 3.0kg/6.64lbs for a medium plate, with a thickness of 32mm, the LASA LWA IV SA06 body armour plate delivers outstanding protection at NIJ 0101.06.

Key Features

  • Each ballistic insert weighs 3.0kg/6.64lbs (medium plate)
  • 31mm thickness
  • Standalone solution
  • Ballistic capability for special armour piecing threats at NIJ 0101.06
    • 7.62mm AP M2
    • 7.62mm BZ API
    • 7.62mm B32 API
  • Passes stringent NIJ 0101.06 drop test requirements
  • Incorporates NP Aerospace’s patented crack mitigation system to deliver outstanding multi-hit protection

Read more

LASA LWB Covert SA06

The cutting edge LASA LWB Covert SA06 body armour plate, designed to fit under standard clothing is ideal for military and law enforcement operations where the wearer needs to blend in with their surroundings.

Designed to be ultra-lightweight and inconspicuous, the LASA LWB Covert SA06 body armour plate weighs just 0.91kg (medium variant) with a 21mm thickness, tapered to 11mm around the edges for enhanced discreetness.

The LASA LWB Covert SA06 works as a standalone solution to deliver high impact, multi-hit protection against special threats at NIJ 0101.06.

 

Key Features

  • Covert design shaped to conform to the user’s body shape, delivering discreet protection
  • Working as a standalone solution, the body armour protects the wearer from the following special threats:
    • 56 x 45mm 55gr ball (M193)
    • 7.62 x 39mm 123gr PS ball (mild steel core)
  • Ultra- lightweight design, a medium torso plate weighs just 0.91kg (areal weight of 14.2kg/m2)
  • Undetectable from metal detectors
  • Buoyant and ergonomic design prevents drag when used in water
  • Passes stringent NIJ 0101.06 drop test requirements

Read more

Ops-Core SOTR

Half-mask Special Operations Tactical Respirator (SOTR) is designed to provide protection against a wide range of oil- and non-oil-based particulate contaminants.

  • Offers at least 99.97% filtration efficiency against airborne particulates including Lead, Asbestos, lubricant mist, and explosive gunfire residue
  • Non microphone or microphone version available, compatible with standard ground communications headsets to enable radio communications
  • Seamlessly integrates with NVGs and other eye protection products, as well as over the ear hearing protection products
  • Two exhalation valves for easier breathing
  • Easy to adjust suspension straps suspension straps to be worn with or without a helmet
  • Flexible and lightweight silicone face piece with a wide, wraparound, and pleated design to enable the respirator to fit to a large variety of facial types
  • Front mounted inhalation valves and cartridge ports for an enhanced field-of-vision and a quick one-handed filter change

Read more

OPS-CORE AMP CONNECTORIZED

For leading-edge tactical ear protection and unprecedented audio quality, choose the Ops-Core AMP® Communication Headset. This advanced tactical communications headset integrates seamlessly with Ops-Core helmets and accessories to create a lightweight protective headborne system for any mission and environment. AMP’s unique 3D Hear-Through Technology and optional NFMI earplugs provide double hearing protection that restores and enhances natural hearing and sound localization while maintaining clear communication for enhanced situational awareness. With a noise-cancelling microphone that mitigates all background noise, AMP is the ideal communications headset to wear in any unpredictable combat environment. This ergonomically designed headset can be configured to meet a wide range of tactical communications needs and delivers ear protection while providing optimal comfort and a streamlined profile. This noise-cancelling headset has a user-based design and can be easily adapted to either headband or helmet configurations, and the optional Rail Mount Kit increases helmet stabilization. AMP features an integrated fixed downlead connection point and quick release downlead connection.

Read more

OPS-CORE NFMI EARPLUGS

  • The Ops-Core® Near Field Magnetic Induction (NFMI) Earplugs provide increased noise reduction, while maintaining clear communications and 3D Hear-Through, when used with NFMI enabled Ops-Core headsets.
  • Do not need batteries, recharging, or any wired connection. When engaged, the NFMI earplug will seamlessly integrate for clear communication.
  • The kit ships with standard, slim, and large Comply foam tips, to accommodate a wide variety of users.

Read more

OPS-CORE STEP-IN® VISOR

The Ops-Core STEP-IN® Visor is a low-profile protective visor, designed with unique geometry that allows it to sit comfortably behind NVGs, while also providing high-performing vision protection. Depending on individual mission requirements, users can easily switch between clear, tinted, and dazzle lenses, all made specifically for these ballistic goggles. The removable rubber gaskets keep debris out of users’ eyes and can be taken off for missions where additional ventilation is needed, making it the ideal helmet visor for a range of intense environments. This STEP-IN Visor can be worn in extreme conditions, including parachute operations and jump scenarios with up to 120 mph winds. With a one-size-fits-all design, the STEP-IN Visor seamlessly integrates with nearly all Ops-Core and Gentex helmet systems, regardless of the shell cut. The retention bungees allow users to easily attach the ballistic helmet visor onto a helmet and can be adjusted and locked into place and attached to the helmet Velcro when not in use.

Read more

OPS-CORE FAST CARBON COMPOSITE MANDIBLE

  • Increased blunt impact and elemental protection
  • Lightweight design easily attaches to SHC ARC Shim
  • Pivoting vent plate to reduce fog, enable clear communication and easy hydration access
  • Uninterrupted Field of View
  • Compatible with any Ops-Core FAST Helmet equipped with the Super High-Cut Skeleton ARC Rails and Super High-Cut Skeleton ARC Shim
  • SHC Skeleton Rails and SHC ARC Shims available as upgrade kit to any Ops-Core FAST Helmet
  • One Size Fits All
  • Colors: Tan 499, Black, Urban Gray, Multicam, and Multicam Black

Read more

OPS-CORE FORCE-ON-FORCE MANDIBLE

  • Provides protection for the mouth, nose, ear, and neck areas
  • Flexible Armor provides the ability to obtain a solid cheek weld
  • Breathable Soft Armor reduces fogging
  • Removable neck skirt to scale coverage
  • Fore-aft and vertically adjustable
  • Compatible with any Ops-Core helmet system or helmet equipped with Ops-Core ARC Rails
  • One Size Fits All
  • Colors: Tan 499, Black, and Ranger Green

Read more

OPS-CORE FAST XP HIGH CUT HELMET

  • FAST XP (Formally FAST Ballistic High Cut)
  • High cut shell made of a hybrid composite of carbon, unidirectional polyethylene, and woven aramid.
  • Raised ear cut allows for integration with communications headsets.
  • Features an Ops-Core Skeleton Shroud for universal compatibility with most NVG mounts, 4-position Accessory Rail Connectors (ARCs) and external VELCRO® brand loop.
  • Available with four suspension/retention options.
  • Includes Ops-Core Helmet Bag.

Read more

OPS-CORE COUNTERWEIGHT

  • Customizable weight management system designed to enhance comfort and reduce neck strain.
  • (5) 70g removable weights and (5) elastic pockets.
  • Total weight system is 0.85lbs (385g).
  • Elastic pockets can stretch to fit (2) weights or (1) weight and (1) battery (AA, AAA or 123).
  • Mounts to the rear of the helmet with custom anchors using the existing helmet holes with longer ballistic screws (provided).
  • Rear VELCRO® brand fastener attachment ensures motion free and secure positioning.
  • Chemlight window and the patch with VELCRO® brand fasteners for Glint tape for use with low light IFF.
  • Durable construction.
  • Compatible with Sentry and FAST helmets.
  • Currently available in urban tan, foliage green and black.

Read more

TACTICAL ELECTRONICS CORE TEAM KIT

The CORE Team Kit includes all of the CORE Cameras, Grips and Monitors needed for a successful mission. Quickly interchange camera heads from the CORE Grip to the POLE Grip and view video on HD CORE Monitors. All CORE cameras are Wireless, High Definition, and Digitally Encrypted. The CORE Team Kit is packaged in a durable transport case with custom cut foam for each component.

The CORE Pole Camera and CORE Flex Camera features the latest Thermal Fusion Technology. Thermal Fusion technology is made possible by two video sensors: a High-Definition 1280x720p monochrome CMOS sensor with excellent low-light sensitivity, and a Longwave infrared (LWIR) thermal imager. Video from the High-Definition camera is used to produce a blended image of both sensors, delivering physical detail that surpasses what is available from a lone thermal imager. Objects and persons are clearly defined with color and outlines when the thermal fusion technology is used.

Read more

TACTICAL ELECTRONICS K9-XR CAMERA

The K9-XR Camera is a high-powered extended range camera system that transmits live video and audio back to the K9 handler. Easily receive video/audio on the K9-XR Monitor up to 450 meters away from the canine. The camera mounts to the K9’s vest using molle and Velcro attachments. Two-way audio on the K9-XR Camera allows handlers to give commands and listen to a canine and/or suspect, utilizing the “Push to Talk” feature.

The K9-XR Camera combines a low-light color camera with high-intensity visible & IR LEDs, providing vision in extreme low-light environments. The K9-XR Camera also includes a white-hot thermal camera for detecting hidden heat signatures. Handlers can remotely toggle between the color and thermal cameras by pressing the view button on the K9-XR Monitor.

The camera arm is spring loaded, allowing canines to maneuver through tight spaces and obstacles. An internal DVR records audio and video directly to a micro SD card. K9 handlers can watch live video from the dog’s perspective while simultaneously recording the video for evidence collection and training purposes. The foldaway camera neck and removable antennas make the K9-XR Camera compact and easy to transport via soft carry or hard case.

Read more

G24R Mount Tan

NIGHT VISION GOGGLE MOUNT

The G24R rail mount utilizes the same interface found on the DPAM/GSGM mounts. Designed to mount onto our lo-pro rail shroud or interface plate, for maximum weight reduction and lowest profile.

Read more

BREACHING

EBAD

We understand that some missions require breaking through barriers. Since 1836, EBAD has been on the front lines with the warfighter working to get them through the toughest of barriers safely, reliably and efficiently. As the leading provider of man-portable breaching systems, we have designed, developed, and are currently qualified on a number of systems for the U.S. Department of Defense and for international allied forces. Our systems vary, just like your missions: from single shot wall and quick door breaching applications to systems designed to provide a clear path through minefields and breaching obstacles.

Read more

SAN Ltd Breaching Tool

The leading hydraulic tactical door breaching tool is our Innovative, Light, and Rugged Door Breaker.

Weight:
Aluminum – 4.1 kg
Hybrid – 5 kg

Lifting Force: 6.2 ton

Stroke: 260 mm

Read more

Hybrid PATRIOT 5510

With exclusive 5500 psi bottles and an unprecedented 10 year warranty, the Hybrid PATRIOT 5510 offers responders four breathing modes – SCBA, PAPR, APR, and SAR. The Hybrid PATRIOT 5510 is the next generation in hybrid life support systems offering innovative electronics, equipped for CBRN environments, improved monitoring capability, revolutionary power supply system, and world class breaching/cutting torch options.

Read more

QUICK RESPONSE KIT EMERGENCY SCBA

The QRK (Quick Response Kit) provides operators and first responders with a simple, compact and lightweight 30 minute SCBA (self contained breathing apparatus) system that can be utilized on its own or used in conjunction with the Hybrid Patriot 5510®. The QRK is ideal for personnel who are tasked with containing situations and offering immediate protection and assistance until backup arrives. The QRK’s compact design allows it to easily be stowed/concealed inside the custom sling pack and quickly deployed when needed. The pack features several pockets, pouches, MOLLE and Hook and loop for other essential items.

Compatible with the Hybrid Patriot 5510, The QRK can be used for SubT, man-down rescue, VIP extraction, hand-off air supply and undercover/low vis operations where hazardous atmospheric environments are present or potentially exist. Once the QRK is attached onto the Hybrid Patriot 5510 center chassis, the end user is provided with the same capabilities (SCBA, PAPR (powered air purifying respirator), APR (air purifying respirator) and SAR (supplied air respirator) offered by the Hybrid Patriot 5510.

Read more

MOBILITY

ARMOURED VEHICLES

Level Peaks has partnered with leading suppliers of advanced armoured vehicle solutions. Our customers need equipment they can rely on to keep them safe and secure to get the job done. We have the ability to provide not only custom armoured solutions, but the training and support to ensure the end-users can maximise their new capability. From personal security, through to police and large military vehicles, we have a solution that you can trust in your chosen environment.

Read more